Raysafe DXR+ 直讀式的指示燈光野和射線野一致性檢測尺詳細介紹：
Raysafe DXR+光野檢測尺
RaySafe DXR+ 的傳感器排列經過特殊設計以便適合實時檢測拍片機、乳腺機照射野和指示光野一致性的需要。 

RaySafe DXR+ 可在低至30千伏的電壓下使用，并能給出客觀的，可復寫的而且能立即讀出的結果。

RaySafe DXR+ PCB 上可見一X射線影像的公制刻度，慣用規則建議照射野與指示光野一致性誤差應小于SID的2%.，而乳腺機則為距檢查床邊緣±5毫米，傳感器的特性給需要調整的地方提供了即時的結果。

標準配置：輻射電子尺1把，說明書1張，鋁合金包裝盒1只
 

 

Raysafe DXR+光野檢測尺,Raysafe DXR+,Raysafe DXR+射線野檢測尺,Raysafe DXR+檢測尺

Raysafe DXR+ 直讀式的指示燈光野和射線野檢測尺,Raysafe DXR+光野檢測尺

Raysafe DXR+ 直讀式的指示燈光野和射線野檢測尺,Raysafe DXR+光野檢測尺

RaySafe DXR+
The RaySafe DXR+, a Direct X-ray Ruler, repre-sents the latest in today’s technology for alignment of the light and radiation field. (Traditionally screen film cassettes have been used for X-ray and light field alignment measurements. The digitalization of X-ray imaging makes this method obsolete as cas-settes and film processors are often unavailable.) It is the ideal solution for performing most accurate measurements for radiography and mammography.

An Easy-To-Use Instrument

The RaySafe DXR+ is an easy-to-use instrument and the ideal solution for improving digital imaging in the radiographic and mammographic field. As soon as it is exposed to X-ray the RaySafe DXR+ is automatically switched on. Features include auto reset and auto power off. There is no need to adjust the light field to a square phantom before making an exposure and no time is wasted waiting for films to be developed.

Quick Checks
International regulations recommends that the radiation and light field should be aligned within 2% of the SID or even ± 5 mm at the chest wall for mammo. The pocket-sized RaySafe DXR+ enables an objective, reproducible and immediate read-out down to 30 kVp. The RaySafe DXR+ sensor array has been specially designed to meet the needs of real-time radiographic and mammographic X-ray equipment. The sensor provides an accurate and instantaneous result it and therefore indicates where adjustment is needed. A metric scale on the RaySafe DXR+ PCB is visible on the X-ray image.